Air Handlers

Nick’s Dun-Rite Heat & AC Services is proud to be a Rheem dealer. With Rheem you can expect to be comfortable. That is why Rheem is the best choice you can make. They simply offer the finest air conditioning solutions in the business. Top-quality, innovative products with the latest technology, dependable performance, great warranties and excellent service and support. Below you can view Rheem air conditioner’s and if you are not sure what you want, Nick’s Dun-Rite Heat & AC Services will be happy to make a recommendation. If you have any questions or we can assist you in any way, please feel free to contact our office at 214-900-6096.

Hydronic Air Handler – Powered by Tankless Technology (RWMV)

Hydronic Air Handler – Powered by Tankless Technology (RWMV)

Specifications:

Integrated Heating and Water Heating
Hydronic heating coil

Overview:

  • Hydronic Air Handler
    • Low profile 34-inch design is lighter, easier to handle and leaves room for optional accessories
    • Left or right side electric connections
    • Integrated control board features diagnostics, manages all operational functions and provides hookups for humidifier and electronic air cleaner
    • An insulated blower compartment makes it one of the quietest hydronic air handlers on the market today
    • Pre-paint galvanized steel cabinet
    • Molded permanent filter(s)
    • Transformer and control fuse protection
    • Solid bottom is standard
    • A variety of cooling coils and plenums designed to use with the Hydronic Air Handler are available as optional accessories for air conditioning models
    • Stainless steel water pump
    • Field covertiable for vertical downflow, horizontal left hand, or right hand air supply
    • Energy efficient ECM motor which slowly ramps up speed for quiet and finely tuned operation to maintain constant CFM
    • Factory installed indoor coil
    • Pump control knob allows adjustment of the differential between the inlet water temperature and outlet air temperature.

Tankless Water Heater

  • Industry best! Minimum flow rate of .26 GPM, minimum activation flow rate of .40 GPM
  • ENERGY STAR® rated models available
  • Next generation burner technology
  • UMC-117 remote control and 10 ft. of thermostat wire is included
  • EZ-Link™ cable available for high demand applications to connect two tankless units to operate as one
  • High-altitude capability – up to 8,400 ft. elevation above sea level (no chip required)
  • Intelligent electronic controls designed to increase energy efficiency and safety
  • Self Diagnostic System
  • Rheem Exclusive! Built-in Condensate Neutralizer for safe disposal of condensate.
  • Rheem Exclusive! Overheat Film Wrap Safetly shuts down the heater at unsafe temperatures.
  • All models are compatible with 1/2″ gas line.
  • Condensing models vent with PVC for easier installations.

High Efficiency Modulating with CFM Motor (RHMV)High Efficiency Modulating with CFM Motor (RHMV)

Specifications:

EcoNet™ Enabled
Efficiencies up to 20.5 SEER
The RHMV features an Electronic Expansion Valve (EEV)
Factory-installed indoor coil

Overview:

  • The RHMV is EcoNet Enabled: This allows the RHMV to directly communicate with the EcoNet Smart Home System.
  • The RHMV features an Electronic Expansion Valve (EEV)
  • Features a constant CFM variable speed motor (ECM) which provides enhanced SEER performance. The RHMV is rated with RA17, RA20 air conditioners and RP17, RP20 heat pumps.
  • Evaporator is constructed of aluminum fins bonded to internally grooved aluminum tubing.
  • Versatile 4-way convertible design for upflow, downflow, horizontal left and horizontal right applications.
  • Factory-installed indoor coil.
  • Sturdy cabinet construction with 1.0 inch [25.4 mm] of foil faced insulation for excellent sound and insulating characteristics.
  • Field-installed auxiliary electric heater kits provide exact heat for indoor comfort. Kits include circuit breakers which meet U.L. and cUL requirements for service disconnect.
  • 11/2 ton [5.3 kW] through 5 ton [17.6 kW] models are between 421/2 to 57 inches [1080 to 1448 mm] tall and 22 inches [559 mm] deep.
  • All models meet or exceed 330 to 400 CFM [156 to 189 L/s] per ton at .3 inches [.7 kPa] of external static pressure.
  • Enhanced airflow up to .7″ external static pressure.
  • Suitable for application in mobile homes.

High Efficiency – Two-Stage ECM Motor (RH2T)High Efficiency – Two-Stage ECM Motor (RH2T)

Specifications:

Efficiencies up to 20 SEER
EcoNet enabled
Constant torque two-stage airflow
All aluminium indoor coil

Overview:

  • The RH2T is EcoNet Enabled (EEV Option): This allows the RH2T to directly communicate with the EcoNet Smart Home System.
  • Electronic Expansion Valve (EEV) or Thermostatic Expansion Valve (TXV)
  • The RH2T features a Constant Torque Two-stage motor (ECM) which provides enhanced SEER performance with most Rheem outdoor units.
  • Evaporator is constructed of aluminum fins bonded to internally grooved aluminum tubing.
  • Versatile 4-way convertible design for upflow, downflow, horizontal left and horizontal right applications.
  • Factory-installed indoor coil.
  • Sturdy cabinet construction with 1.0 inch [25.4 mm] of foil faced insulation for excellent sound and insulating characteristics.
  • Field-installed auxiliary electric heater kits provide exact heat for indoor comfort. Kits include circuit breakers which meet U.L. and cUL requirements for service disconnect.
  • 1½ ton [5.3 kW] through 5 ton [17.6 kW] models are between 42½ to 57 inches [1080 to 1448 mm] tall and 22 inches [559 mm] deep.
  • All models meet or exceed 330 to 400 CFM [156 to 189 L/s] per ton at .3 inches [.7 kPa] of external static pressure.
  • Enhanced airflow up to .7″ external static pressure.
  • Suitable for application in mobile homes.

Hydronic Air Handler – Powered by Tankless Technology (RW1T)Hydronic Air Handler – Powered by Tankless Technology (RW1T)

Specifications:

Integrated Heating and Water Heating
Hydronic heating coil
Constant Toque motor

Features:

  • New composite base pan – dampens sound, captures louver panels, eliminates corrosion and reduces number of fasteners needed.
  • Powder coat paint system – for a long lasting professional finish.
  • Scroll compressor – uses 70% fewer moving parts for higher efficiency and increased reliability.
  • Modern cabinet aesthetics – increased curb appeal with visually appealing design.
  • Curved louver panels – provide ultimate coil protection, enhance cabinet strength, and increased cabinet rigidity.
  • Optimized fan orifice – optimizes airflow and reduces unit sound.
  • Rust resistant screws – confirmed through 1500-hour salt spray testing.
  • PlusOne™ Expanded Valve Space – 3″-4″-5″ service valve space – provides a minimum working area of 27-square inches for easier access.
  • PlusOne™ Triple Service Access – 15″ wide, industry leading corner service access – makes repairs easier and faster. The two fastener removable corner allows optimal access to internal unit components. Individual louver panels come out once fastener is removed, for faster coil cleaning and easier cabinet reassembly.
  • Diagnostic service window with two-fastener opening – provides access to the TXV valves and the heat pump reversing valve before opening the unit.
  • External gauge port access – allows easy connection of “low-loss” gauge ports.
  • Single-row condenser coil – makes unit lighter and allows thorough coil cleaning to maintain “out of the box” performance.
  • 35% fewer cabinet fasteners and fastener-free base – allow for faster access to internal components and hassle-free panel removal.
  • Service trays – hold fasteners or caps during service calls.
  • QR code – provides technical information on demand for faster service calls.
  • Fan motor harness with extra-long wires – allows unit top to be removed without disconnecting fan wire.

High Efficiency – ECM Motor (RH2V)High Efficiency – ECM Motor (RH2V)

Specifications:

Efficiencies up to 18 SEER
High Efficiency, constant CFM two-stage air flow
All aluminum indoor coil

Overview:

  • Includes an energy efficient ECM® Motor, which in most applications, enhances the SEER rating of the outdoor unit. It also slowly ramps its speed up for quiet operation and enhanced customer satisfaction.
  • Versatile 4-way convertible design for upflow, downflow, horizontal left and horizontal right applications.
  • Nominal airflow up to 1.0″ external static pressure.
  • Factory-installed indoor coil.
  • Sturdy cabinet construction with 1.0 inch [25.4 mm] of foil faced insulation for excellent sound and insulating characteristics.
  • Field-installed auxiliary electric heater kits provide exact heat for indoor comfort. Kits include circuit breakers which meet U.L. and cUL requirements for service disconnect.
  • Dip switch settings for selectable, customized cooling airflow over a wide variety of applications.
  • On-demand dehumidification terminal that adjusts airflow to help control humidity for unsurpassed comfort in cooling mode.
  • External filter required.
  • Evaporator coil is constructed of aluminum fins bonded to internally grooved aluminum tubing.

High Efficiency – ECM Motor (RH1V) High Efficiency – ECM Motor (RH1V)

Specifications:

Efficiencies up to 16 SEER
Constant CFM single-stage air flow
All aluminum indoor coil

Features:

  • Includes an energy efficient ECM® Motor, which in most applications, enhances the SEER rating of the outdoor unit. It also slowly ramps its speed up for quiet operation and enhanced customer satisfaction.
  • Versatile 4-way convertible design for upflow, downflow, horizontal left and horizontal right applications.
  • Nominal airflow up to 1.0″ external static pressure.
  • Factory-installed indoor coil.
  • Sturdy cabinet construction with 1.0 inch [25.4 mm] of foil faced insulation for excellent sound and insulating characteristics.
  • Field-installed auxiliary electric heater kits provide exact heat for indoor comfort. Kits include circuit breakers which meet U.L. and cUL requirements for service disconnect.
  • Dip switch settings for selectable, customized cooling airflow over a wide variety of applications.
  • On-demand dehumidification terminal that adjusts airflow to help control humidity for unsurpassed comfort in cooling mode.
  • External filter required.
  • Evaporator coil is constructed of aluminum fins bonded to internally grooved aluminum tubing.

High Efficiency Constant Torque (ECM) Motor (RH1T)High Efficiency Constant Torque (ECM) Motor (RH1T)

Specifications:

Efficiencies up to 16 SEER
Constant torque (ECM) single-stage air flow
All aluminum indoor coil

Overview:

  • RH1T feature a Constant Torque motor (ECM) which provides enhanced SEER performance with most Rheem outdoor units.
  • Versatile 4-way convertible design for upflow, downflow, horizontal left and horizontal right applications.
  • Factory-installed indoor coil. • Sturdy cabinet construction with 1.0 inch [25.4 mm] of foil faced insulation for excellent sound and insulating characteristics.
  • Field-installed auxiliary electric heater kits provide exact heat for indoor comfort. Kits include circuit breakers which meet U.L. and cUL requirements for service disconnect.
  • 11/2 ton [5.3 kW] through 5 ton [17.6 kW] models are between 421/2 to 551/2 inches [1080 to 1410 mm] tall and 22 inches [559 mm] deep.
  • All models meet or exceed 330 to 400 CFM [156 to 189 L/s] per ton at .3 inches [.7 kPa] of external static pressure.
  • Enhanced airflow up to .7″ external static pressure.
  • Evaporator is constructed of aluminum fins bonded to internally grooved aluminum tubing.

Front or Bottom Return – with PSC Motor (RF1P)Front or Bottom Return – with PSC Motor (RF1P)

Specifications:

Efficiency up to 15.5 SEER
Compact Unit Design (36″ Tall)
PSC single-stage airflow
All Aluminum indoor coil

Overview:

  • Front or Bottom Return
  • Flow Check Piston for cooling or heat pump operation
  • Wall-hanging brackets
  • Built in Filter Rack
  • AHRI Certified
  • UL Certified
  • Molex Plug Connections for field installed heater kits
  • Dual Voltage Direct Drive Blower with multi-speed motor
  • Thermoplastic Drain Pan with bottom primary and secondary connections
  • Optional Decorative Grill for front return applications
  • Optional Factory Installed Condensate Float Switch which shuts off the outdoor unit in event the condensate pan becomes clogged

Hydronic Air Handler – Powered by Tankless Technology (RW1P)Hydronic Air Handler – Powered by Tankless Technology (RW1P)

Specifications:

Integrated Heating and Water Heating
Hydronic heating coil
PSC motor

Overview:

Hydronic Air Handler

  • Low profile 34-inch design is lighter, easier to handle and leaves room for optional accessories
  • Left or right side electric connections
  • Integrated control board features diagnostics, manages all operational functions and provides hookups for humidifier and electronic air cleaner
  • An insulated blower compartment makes it one of the quietest hydronic air handlers on the market today
  • Pre-paint galvanized steel cabinet
  • Molded permanent filter(s)
  • Transformer and control fuse protection
  • Solid bottom is standard
  • A variety of cooling coils and plenums designed to use with the Hydronic Air Handler are available as optional accessories for air conditioning models
  • Stainless steel water pump

Tankless Water Heater

  • Industry best! Minimum flow rate of .26 GPM, minimum activation flow rate of .40 GPM
  • ENERGY STAR® rated models available
  • Next generation burner technology
  • UMC-117 remote control and 10 ft. of thermostat wire is included
  • EZ-Link™ cable available for high demand applications to connect two tankless units to operate as one
  • High-altitude capability – up to 9,840 ft. elevation above sea level (no chip required)
  • Intelligent electronic controls designed to increase energy efficiency and safety
  • Self Diagnostic System

Front or Bottom Return – with ECM Motor (RF1T)Front or Bottom Return – with ECM Motor (RF1T)

Specifications:

Efficiencies up to 16 SEER
Compact Unit Design (36″ Tall)
Constant torque (ECM) single-stage airflow
All aluminum indoor coil

Overview:

  • Front or Bottom Return
  • Flow Check Piston for cooling or heat pump operation
  • Wall-hanging brackets
  • Built in Filter Rack
  • AHRI Certified
  • UL Certified
  • Molex Plug Connections for field installed heater kits
  • Dual Voltage Direct Drive Blower with multi-speed motor
  • Thermoplastic Drain Pan with bottom primary and secondary connections
  • Optional Decorative Grill for front return applications
  • Optional Factory Installed Condensate Float Switch which shuts off the outdoor unit in event the condensate pan becomes clogged

High Efficiency – ECM Motor – 35″ Cabinet Height (RBHP)High Efficiency – ECM Motor – 35″ Cabinet Height (RBHP)

Specifications:

Efficiencies up to 16 SEER
Constant Torque single stage airflow

Overview:

Enjoy the Benefits of Advanced Comfort
The Rheem High-Efficiency Air Handler is engineered to improve energy savings and comfort all year long. The unit’s versatile design makes it a great fit for any system and keeps your home conditioned just the way you like it.

Energy Savings The Rheem RBHP Series Air Handler is designed for high performance, exceeding the standard efficiency requirements and, in many cases, enhancing the efficiency rating of your outdoor air conditioning unit.

Humidity Control A new Rheem Air Handler will help manage humidity levels in the home, improving your comfort and helping you save money on energy bills.

Efficient Heating & Cooling Rheem Air Handlers also feature a flexible design that allows them to meet the needs of a variety of systems. Your contractor will recommend a unit that will best meet your home’s airflow needs. 

The Rewards of Rheem Proven Quality

Quiet Operation The Rheem RBHP Series Air Handler is designed with a sturdy steel cabinet with one inch of foil-faced insulation, offering excellent thermal and sound insulation.

Versatile Design The 4-way convertible design of Rheem Air Handlers allows the unit to fit in with the design of your home.

Easy Service Rheem Air Handlers have been engineered to provide your technician easy access to all internal components, including a permanent, accessible and washable filter, helping any service time stay short and simple.

Standard Efficiency – PSC Motor (RH1P)Standard Efficiency – PSC Motor (RH1P)

Specifications:

Efficiencies up to 15 SEER
PSC Motor
Factory-Installed indoor coil

Overview:

  • Versatile 4-way convertible design for upflow, downflow, horizontal left and horizontal right applications.
  • Factory-installed indoor coil.
  • Sturdy cabinet construction with 1.0 inch [25.4 mm] of foil faced insulation for excellent sound and insulating characteristics.
  • Field-installed auxiliary electric heater kits provide exact heat for indoor comfort. Kits include circuit breakers which meet U.L. and cUL requirements for service disconnect.
  • 11/2 ton [5.3 kW] through 5 ton [17.6 kW] models are between 421/2 to 551/2 inches [1080 to 1410 mm] tall and 22 inches [559 mm] deep.
  • All models meet or exceed 330 to 400 CFM [156 to 189 L/s] per ton at .3 inches [.7 kPa] of external static pressure.
  • Enhanced airflow up to .7″ external static pressure.
  • Evaporator is constructed of aluminum fins bonded to internally grooved aluminum tubing.

Front or Bottom Return – Slab Coil with PSC Motor (RHAL)Front or Bottom Return – Slab Coil with PSC Motor (RHAL)

Specifications:

Efficiencies up to 15 SEER
Front or Bottom Return

Overview:

Enjoy the Benefits of Guaranteed Comfort
At Rheem, we understand the needs of everyday living, which is why the Rheem RHAL Air Handler was designed to guarantee homeowners like you highly efficient performance with improved energy savings and greater comfort.

Flexible Performance The Rheem RHAL Series Air Handler is designed to meet the needs of a variety of systems.

Easy Installation The Rheem RHAL Air Handler includes wall-hanging brackets, designed to make installation a breeze. AHRI and UL certifications help guarantee that, post-installation, the unit operates as advertised.

Efficient Heating & Cooling With the Rheem RHAL Air Handler,you have the choice between a higher or lower efficiency unit. However,both options deliver comfortable cooling while still helping to manage the household budget.

Enjoy Long-Lasting Quality and Comfort
Affordable and Reliable The Rheem RHAL Air Handler is certified and independently verified, delivering guaranteed comfort for your home that’s easy to afford.

Durable Design Rheem Air Handlers are designed to be durable andlong-lasting. A unique drip pan feature protects your home from potentially damaging condensation run-off, delivering peace of mind in addition to long-lasting comfort.

Optional Electric Heat The Rheem RHAL Air Handler features connections for heater kits to provide efficient heating for your home –keeping you cozy all winter long.

Front or Bottom Return – Slab Coil with ECM Motor (RHBL)Front or Bottom Return – Slab Coil with ECM Motor (RHBL)

Specifications:

Efficiencies up to 16 SEER
Front or Bottom Return
ECM motor

Overview:

Enjoy the Benefits of Guaranteed Comfort
The Rheem RHBL Air Handler is engineered to improve energy savings and comfort all year long. The unit’s versatile design makes it a great fit for any system and keeps your home conditioned just the way you like it.

Energy Savings The Rheem RHBL Series Air Handler is designed for high performance, exceeding the standard efficiency requirements and, in many cases, enhancing the efficiency rating of your outdoor air conditioning unit.

Humidity Control A new Rheem Air Handler will help manage humidity levels in the home, improving your comfort and helping you save money on energy bills.

Efficient Heating & Cooling Rheem Air Handlers also feature a flexible design that allows them to meet the needs of a variety of systems. Your contractor will recommend a unit that will best meet your home’s airflow needs.

The Rewards of Rheem Proven Quality

Affordable and Reliable The Rheem RHBL Air Handler is certified and independently verified, delivering guaranteed comfort for your home that’s easy to afford.

Durable Design Rheem Air Handlers are designed to be durable and long-lasting. A unique drip pan feature protects your home from potentially damaging condensation run-off, delivering peace of mind in addition to long-lasting comfort.

Optional Electric Heat The Rheem RHBL Air Handler features connections for heater kits to provide efficient heating for your home – keeping you cozy all winter long.

Easy Service Rheem Air Handlers have been engineered to provide your technician easy access to all internal components, helping any service time stay short and simple.

Hydronic Coil PSC or X-13 Motor OptionHydronic Coil PSC or X-13 Motor Option

Specifications:

Model RHWB
Integrated HVAC & Water Heating
Home heating and water heating – powered by tankless technology

Overview:

Enjoy the Advantages of an Integrated Air and Water Solution
As part of the industry’s only heating and water heating system that’s designed, built and warrantied by one company, Rheem Hydronic Air Handlers allow you to enjoy reliable home comfort, while maximizing energy efficiency and minimizing energy costs.

Energy Savings The greatest energy savings from Rheem Hydronic Air Handlers are experienced during colder months when heating is needed; that’s because RHWB models are able to absorb the heat needed to warm your home from hot water produced by an up to 94% efficient Rheem Tankless Water Heater. This means your home can be heated at up to 94% efficiency, because the water heater powers heat production. Additional energy savings can be experienced year-round by choosing an RHWB model with a high-efficiency blower motor, and pairing the unit with a high-efficiency Rheem cooling system.

Humidity Control A Rheem Hydronic Air Handler improves the comfort of your home by maintaining proper humidity levels, improving air quality and lowering static electricity levels. Because the unit uses water to transfer heat, the heat you feel is naturally softer and less drying than heat produced by traditional furnaces and air handlers.

Complete Integrated Home Comfort As part of a complete home comfort system, this hydronic air handler is compatible with a full line of Rheem products, including tankless water heaters, air conditioning units, heat pumps and cooling coils. Your contractor can recommend the best system to provide your family with the versatility of comfort every season.

The Rewards of Rheem Proven Quality

Quiet Operation An insulated blower compartment makes Rheem Hydronic Air Handlers some of the quietest hydronic air handlers available. Choosing a model with a high-efficiency blower motor allows you to enjoy greater energy savings along with quiet operation.

Versatile Design The 4-way convertible design and low 34″ profile of Rheem Hydronic Air Handlers allow the unit to easily fit in with the design of your home.

Easy Service Rheem Hydronic Air Handlers are engineered to provide technicians easy access to all internal components, helping to keep any regular maintenance short and simple.

If you have any questions or we can assist you in any way, please feel free to contact our office at 214-900-6096.

Have a Question?

Let us know how we can help.

Name(Required)
This field is for validation purposes and should be left unchanged.
Call Us Today!
24/7 Emergency Service
SERVICES
SERVICE AREAS
Request an Estimate
Name(Required)
This field is for validation purposes and should be left unchanged.
Call Now Button